Ala Press

Nkọwa nkenke:

Igwe na-agbapụta agbapụ bụ ụdị igwe eji egbu egbu nke mepụtara mba ụwa na etiti 1980s. Ọhụrụ extrusion egweri technology tumadi ekewet ya nwere mmetụta dị ukwuu na ike ịzọpụta, na e n'ọtụtụ ebe kpọrọ site mba ciment ụlọ ọrụ dị ka a mmepe-egweri. Nkà na ụzụ ọhụrụ nke nkà.


Product Ihe

Ajụjụ

Ngwaahịa

The ala pịa bụ ọhụrụ egweri ngwá mepụtara ufọt ufọt 1980. The ọhụrụ extruding na-egweri technology tumadi mejupụtara ya nwere a dị ịrịba ama mmetụta na ike ịzọpụta, na ọ natara oké anya si mba ciment ụlọ ọrụ. Ọ ghọọla nkà na ụzụ ọhụrụ na mmepe nke teknụzụ na-egweri. The igwe adopts na-arụ ọrụ ụkpụrụ nke ala ike oriri nke elu-mgbali ihe oyi akwa na adopts na-arụ ọrụ mode nke otu urughuru ndinuak ke otu. Mgbe nrụgide dị elu nke extrition nke ihe na-emebi emebi (nrụgide na mpaghara nrụgide nke akụrụngwa ahụ bụ ihe dịka 15 MPa, oke nha nke ihe ahụ na-ebelata ngwa ngwa. Ọdịdị ntụ ntụ dị mma nke na-erughị 0.08mm ruru 20% ~ 30%, na ihe nke 2mm ruru 70%, ma enwere ọnụ ọgụgụ dị ukwuu nke cracks na ihe niile a na-emepụta, nke mere na usoro na-esote nke igweri, ike oriri achọrọ dị ala nke ukwuu. Dị ka data ndị mba ọzọ dị mkpa na ahụmịhe bara uru anyị si dị, ma e jiri ya tụnyere. ka-egweri usoro na-adịghị onwem na ala pịa, egweri usoro na-onwem na ala pịa nwere ike dịkwuo mmepụta site 50% ~ 200%, na ike oriri kwa unit nwere ike belata 20% ~ 35%. Na mgbakwunye, n'ihi obere uwe nke igwe na-agba, ikike ike kwa igwe ihe na-ebelata nke ukwuu.

Isi akụrụngwa bụ ụzọ abụọ na-agbagharị agbagharị, a na-enye ihe ndị na-atụgharị uche n'ime ihe na-eri nri nke nwere mkpụrụ ndụ ibu, na ịgafe site na ngwa nri nke igwe na-agba ala, ma nye ha nri abụọ. ala akwusila ihe n'ime ala ọdịiche, ka ọ dị ugbu a ala pịa elu nsogbu na ihe na-atụgharị ha oké ihe achicha, n'ikpeazụ dara si ọdịiche dị n'etiti abụọ rollers, na-agabiga na-agbapụta n'ahụ na-efegharị efegharị, amịpụtara site erute ngwá na ihe ndị ahụ na-agbasasị ma na-egweri na ngalaba usoro ọzọ.

NKỌWA

TUPUTA iket / h

ANAKP VRINE AKW OFKWỌ nke mbanye (m / s)

MAKMUM NT FEKWU AHXRX

REDUCER

MOTO

Ydị

Ọsọ ọsọ

Ydị

IKE

1200×800

180-230

1.309

0 ~ 30

PGT-50

71

YKK4508-4

500

1400×1000

350-400

1.36

0 ~ 50

JGXP650-WX1

79.5125

YKK4503-4

560

1600×1400

600-800

Ugboro 1.5

0 ~ 80

JGXP1120

   Ugbolu 79.34

YRKK560-4

         1120


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ma zitere anyị ya

    Ngwaahịa emetụtara

    • Raw Vertical Mill

      Raw Vetikal Mill

      Ngwongwo a na-ahụ maka ihe ọkụkụ bụ otu ụdị igwe na-agba agba nke nwere 4 rollers. The egweri ala, rocker ogwe aka, support Ọdịdị na haịdrọlik usoro mejupụtara egweri ike unit, nke na-ekewa n'ime 4 iche iche na-mere ndokwa gburugburu egweri diski. Na teknuzu na echiche nke aku na uba, ihe akuku uzo a na-egweri ngwa ngwa, ma e jiri ya tụnyere ihe eji eme ihe eji eme ihe, o nwere uru ndi a: A ga-eji ya mee ihe maka iche iche ihe ―Small ...

    • Cement mill

      Simenti igwe

      JLMS ala na nkume igwe nri na-eji maka tupu-egweri nke ciment clinker. Workingkpụrụ ya na-arụ ọrụ bụ: clinker na-abanye na nkume igwe nri site na etiti etiti: ihe ahụ na-ada n'etiti etiti egweri site na ike ndọda. The egweri diski nwere njikọ chiri anya na reducer na-ahọrọ adiana na a mgbe nile na-agba. The mgbe nile-ọsọ adiana nke egweri diski ekesa ala ihe evenly na horizontally na lining efere nke egweri diski, ebe taya-ụdị egweri ala ata aru nke ...

    • Cement vertical mill

      Senti vetikal na nkume igwe nri

      Igwe ihe simenti bu akụrụngwa nke na-egweri ihe eji eme simenti. Workingkpụrụ ọrụ dị ka ndị a: a na-enye akụrụngwa nri n'ime eriri nri site na atọ n'usoro ikuku-mkpọchi ikuku, na eriri ntanetị na-agbatị n'ime ime igwe ahụ site n'akụkụ nke separator. Ihe ndị a dakwasịrị n'etiti etiti igwe na-egweri site na mmetụta nke ike ndọda na ikuku ikuku. Na-egweri diski nwere njikọ chiri anya na reducer ma na-agbagharị na ọsọ ọ bụla. Ọsọ na-agba ọsọ mgbe niile ...

    • Slag vertical mill

      Slag vetikal na nkume igwe nri

      Slag vetikal nkume igwe na-adịghị mma mgbali ikuku Ibulite ụdị egweri akụrụngwa, nke ga-akpọ nkụ na slag na Mike slag. Ala slag site na igwe na-egweri ihe na-egweri diski nwere akụkụ abụọ: obere akụkụ nke slag ọhụrụ nwere nnukwu mmiri na ọtụtụ ala slag na-emechabeghị na mmiri dị ala. Nke a na akụkụ nke na-abụghị okokụre slag bụ keadighi rarii ihe laghachiri mgbe nkewa site separator n'ihi na nke ibu ahụ. Ikuku siri ike ikuku kpatara ...

    • Coal vertical mill

      Kol na nkume igwe nri

      JGM2-113 coal na igwe ihe na-agba ọsọ ọsọ. Akụkụ ya ndị na-agagharị agagharị bụ mgbanaka na-agbagharị na 3 na-egweri egwu nke na-agagharị na mgbanaka ahụ, a na-edozi rollers na nke ọ bụla nwere ike ịdabere na axis ya. Iji gwerie raw coal na-ada na mgbanaka na-egweri site na eriri ntụ nke etiti nke ihe igwe ihe na mgbanaka na-agagharị na-agagharị na-egwu ọkụ na-agba ọsọ na-agba ọsọ site na ike nke centrifugal. tụgharịa ...

    • Grinding roller

      Egweri ala

      Ihe Standard GB, EN, DIN, ASTM, GOST, JIS, ISO Materialing Processing Forging, Casting, Welding Heat Treatment Annealing, Normalizing, Q&T, Induction Harding Machining Tolerance Max. 0.01mm igwe na-akpụ akpụ Max. Ra 0.4 Module nke Gear 8-60 ziri ezi nke Ezé Max. ISO Grade 5 Weight / Unit 100kgs - 60 000kgs Mining Mining, Cement, Construction, Chemical, Oil Drilling, Steel Mill, Sugar Mill na Power Plant Asambodo ISO 9001